Stay connected

Belt Transfer RM 5710


A toothed belt transfer direction of transport by 90°. Pneumatically raised toothed belts mounted between the conveyor rollers transport material into the adjacent conveyor line or else remove it from the conveyor line.
Belt Transfer RM 5710
 

Technical Data

   
General technical data  
Max. load capacity (additional) 65 lb (30 kg) with 2 toothed belts
90 lb (40 kg) with 3 toothed belts
110 lb (50 kg) with 4 toothed belts
Max. unit load weight 110 lb (50 kg)
Conveyor speed 40 to 120 ft/min (0.20 to 0.60 m/s)
Ambient temperature +40 to +125 °F (+5 to +50 °C)
Compressed air consumption 0.40 gal. (1.5 l) / cycle + 0.13 gal. (0.5 l) per cycle and per meter of Ø 0.31″ (8 mm) tube
Air pressure 70 psi (5.0 bar)
Inclined/declined Not suitable
Drive  
Rated voltage 480 V / 60 Hz / 3 phase
Max. electrical power 0.11 kW
Drive medium Toothed belt T5
Protection rate IP54
Drive stroke  
Drive medium Pneumatic cylinder
Piston diameter 2.5″ (63 mm)
Side frame  
Combination of frame heights left/right 6″ / 3.15″ (150 mm / 80 mm)
4.75″ / 3.15″ (120 mm / 80 mm)
3.15″ / 3.15″ (80 mm / 80 mm)

Dimensions

Belt Transfer RM 5710

 Dimensions  
LW Clearance 18″ to 40″ (460 mm to 1,010 mm)
P Min. roller pitch 2.95″ (75 mm)
α Angle 90°
CC Outer belt - pitch 9″ to 31.5″ (225 mm to 800 mm)
ΔH Stroke 1″ (25 mm) (0.16″ (4 mm) below top of roller up to 0.8125″ (20.83 mm) above top of roller)
top
© Interroll | Sitemap | Disclaimer