|
|
Heavy Duty Conveyor Roller Series 1450
|
| Bearings |
Balls: Precision ground chrome alloy steel. 6205ZZ precision bearings.
Conforming to ABEC-1 industry standards, they provide virtually infinite life in almost every conveyor application. The bearing housings are made of either black polyamide 6
(Nylon) with a yellow polyamide shield, or conductive molded polypropylene with a polyamide shield. The sealing arrangement protects the ball bearings against coarse dust.
Additionally, the use of technopolymer parts insures low noise operation.
|
| Tube |
Diameters (inch) 2.50" & 3.50"
The housing is swaged and locked in place in the roller tube. Smooth, radiused roller ends facilitate easy transfer of conveyed good, eliminating any possibility of snagging or
scraping sensitive surfaces. The steel tubes have a wall thickness of .120" (11 gauge) and are supplied in either galvanized or mill finish.
|
| Shaft |
Diameter: .787" (20mm) Hexagonal: .687" straight hex & .687" patented Taperhex
Shafts can be supplied with the sizes listed above and can be spring loaded or end drilled and tapped.
|
| Application |
This roller is suitable for conveying heavy items, particularly pallets and containers. The load capacity can be up to 1,124 lbs. (depending on conveyor width and speed).
|
