RollerDrive EC110


RollerDrive EC110 has the most torque in the whole product line. It was developed specifically under the aspect of increased efficiency, to enable 24 VDC conveyor systems to work with less energy since ever.
Based on the design of the EC100 there are eight different gear ratios to chose from.
Even heaviest loads can be moved reliably with a mechanical performance of 31 Watts.



Characteristics
  • 31 Watt continuous mechanical performance
  • External commutation electronic
  • 8 gear ratios
  • After run reducing motor stop function
  • Zero motion hold for declines
  • 15.000 hours minimum operation time
  • Protection rate IP54
  • 55 dB(A) noise emission mounted in conveyor
  • 1000 mm cable length
  • 8 pole Tyco connector

User Manual Interroll RollerDrive EC100 and EC110

Electrical Data EC110
Nominal voltage
 24 VDC
Voltage range 22 - 28 VDC
No load current 0.6 A
Maximum continuous current 2.5 A
Maximum peak current
 4.1 A
Mechanical Performance 31 W
Maximum ripple from power supply
 5 %
Noise emission (mounted)
 55 dB(A)
Lifetime under nominal conditions 15000 h
System Efficiency (Drive) 52 %

Performance Data EC100

Gear Ratio
 Speed Range
fpm 		Nominal Torque
in-lbf 		Peak Torque
in-lbf
4 475-157 3 11
9 211-70
 6.6 23
12 158-52 8.9 31
16 119-39 13.3 37
24 79-26 19.5 51
36 53-17 25.7 81
48 40-13 30.1 102
64 30-10 37.6 117

Minimum RL

Gear RatioCalculationIdler Option
9:1
12:1
16:1   
24:1
36:1
48:1
64:1
96:1
11.750

11.625



12.125





Spring Loaded Hex
9:1
12:1
16:1   
24:1
36:1
48:1
64:1
96:1
10.500

10.250



10.750





5/16" Female Hex
9:1
12:1
16:1   
24:1
36:1
48:1
64:1
96:1
12.688

12.563



13.000





Spring Loaded Multi Rib
Spring Loaded Poly-O
9:1
12:1
16:1   
24:1
36:1
48:1
64:1
96:1
12.125

11.938



12.375





M8 Female Multi Rib
M8 Female Poly-O
9:1
12:1
16:1   
24:1
36:1
48:1
64:1
96:1
12.000

11.875



12.313





Standard Grooved
IP66
9:1
12:1
16:1   
24:1
36:1
48:1
64:1
96:1
10.625

10.500



10.938





M8 Female Hex
9:1
12:1
16:1   
24:1
36:1
48:1
64:1
96:1
12.000

11.875



12.313





Standard Grooved


DriveControl for EC110 RollerDrives
HC-EC100/110
                                    
top
© Interroll | Disclaimer