The belt curves feature a safe, form-fit drive concept and have been designed specifically for mixed materials with a wide variety of compositions. Their top of belt height is
only 6.30" (160 mm), with a noise emission level of less than 64 db(A), making them one of the quietest belt curves on the market. The Belt Curve has an automatic belt tensioning
device, a robust belt guide concept and an especially light and rapidly replaced belt without removal of the motor.
| 
| Less tension, higher lifetime
Conventional curves are constructed using tapered drive rollers to drive the belt. The consequence: The Belt-Guiding wears faster.
The positive drive principle allows lower Belt Tension and the usage of cylindrical return rollers. Life-time is increased and gaps to adjacent conveyors are minimized.
The belt is driven via a toothed profile, integrated on the outer edge.
-
Cylindrical return rollers: D = 4″ (100 mm)
-
Speeds: 20 to 500 ft/min (0.10 to 2.50 m/s)
-
Transporting loads: up to 50 kg/m
-
Conveyed goods: especially for mixed unit loads of different shapes and sizes. Parcels, bags, pouches, baggage... and for very small items thanks to cylindrical return rollers
-
Angles: 30°, 45°, 60°, 90°, 180°
-
Effective width: up to 1500 mm
-
Easy to combine with all standard materials handling equipment
-
Ease of maintenance was a design priority for this outstanding belt curve
-
Low noise: noise emissions of <= 64 dB(A)
-
Smooth and aesthetic design, without protruding edges
-
Easy tracking thanks to the positive driving system
|
| |
Technical Data: BC 4608
|
General technical data
|
|
Max. load capacity
|
0 lb/ft (50 kg/m)
|
|
Max. load capacity per module
|
220 lb (100 kg)
|
|
Conveyor speed
|
20 to 500 ft/min (0.10 to 2.50 m/s)
|
|
Inclined/declined
|
Not suitable
|
|
Ambient temperature
|
+25 to +105 °F (-5 to +40 °C)
|
Drive
|
|
Rated voltage
|
480 V / 60 Hz / 3 phase
480 V / 60 Hz / 3 phase
|
|
Electrical power
|
0.5 to 3 HP / 0.37 to 2.20 kW
|
|
Motor type
|
Gear motor
|
|
Diameter of drive roller
|
4″ (100 mm) (cylindrical)
|
|
Diameter of defl ection roller
|
4″ (100 mm) (cylindrical)
|
Materials
|
Conveyor belt
|
Flame retardant in compliance with DIN EN 20340 (optional)
Textured surface
Other surfaces on request
|
Slider bed
|
Low-friction laminated wood (engineered plywood)
11 ga. galvanized steel (optional)
|
Side frame
|
Height of side guide
|
4.75″ (120 mm)
Side guides up to 24″ are avaiable
|
|
|
