Stay connected

RollerDrive EC120 for USA U.S. Market

RollerDrive EC120/2.5 Inch Diameter RollerDrive. This RollerDrive is used for heavy load applications up to 2500 pounds

RollerDrive EC120

Characteristics
  • 31 Watt continuous mechanical performance
  • External commutation electronic
  • 8 gear ratios
  • After run reducing motor stop function
  • Zero motion hold for declines
  • 15.000 hours minimum operation time
  • Protection rate IP54
  • 55 dB(A) noise emission mounted in conveyor
  • 39.4" (1000 mm) cable length
  • 8 pole Tyco connector
Product Specifiation RollerDrive EC110 and EC120

Electrical Data EC110
Nominal voltage
 24 VDC
Voltage range 22 - 26 VDC
No load current 0.5 Amps
Maximum continuous current 2.5 Amps
Maximum peak current
 5.1 Amps
Maximum Foldback Current 2.5 Amps
Noise Emission (Mounted) Less than 65 dBA
Lifetime under nominal conditions 15000 h
Maximum Start/Stop per minute 15
Protection Classification IP54
Ambient Temperature for Operation 32 to 104 °F
Control Card 9006
Maximum Load - 1 RollerDrive 2500 lbs
Mounting nut installation torque
 50 lbf-ft (68 Nm)
* The value can vary according to installation conditions, profile shapes and the resonance behavior of the system.

Performance Data EC120
Gear Ratio Nominal
Torque (in-lbs) 		Peak Torque
 (in-lbf) 		Speed
(fpm) 		Max load /
RollerDrives per zone
12:1 EC110 8.8 31 207-69 100 / 1
16:1 EC110 13 37 154-51 150 / 1
24:1 EC110 19.5 51 103-34 260 / 1
36:1 EC110 26.5 81 69-23 500 / 1
48:1 EC110 30 102 51-17 1000 / 1
36:1 EC120 31 114 52-17 2000 / 1
48:1 EC120 48 149 39-13 2500 / 1
64:1 EC120 63 180 29-10 2500 / 1
96:1 EC120 89 265 20-7 2500 / 1

Minimum RL
CartridgeTubeIdler bearingMin RLMin RL
inch mm
All Sprocket 11/16" hexagonal spring loaded 13.88" 353


DriveControl for EC120 RollerDrives
EC9006


top
© Interroll | Sitemap | Disclaimer