Strip Belt Merge BM 4430 / 4445

The belt merge is a belt conveyor with a 30° or 45° angled connecting edge. This conveyor element enables the merging of two conveyor lines at the corresponding angle. With the use of supplementary sorting elements, belt merges also enable the separation of conveyor flows. The conveying belts are available in widths of 3.54" and 1.5" for especially small materials. The belt merge has an especially low overall height at 4.7”.

General technical data

Max. load capacity*

50 kg/m (33 lbs/ft )

Max. load capacity per module*

100 kg (220 lbs)

Conveyor speed*

0.1 to 2.0 m/s (20 to 690 ft/m )

Incline/slope

Not suitable

Ambient temperature

-5 to +40 °C (23 to 105 °F )

Drive

Rated voltage

400 V / 50 Hz / 3 phase

460 V / 60 Hz / 3 phase

Electrical power

0.37 to 1.10 kW (0.5 to 1.5 HP )

Motor type

Geared motor 0.37 kW to 1.10kW

Geared motor 0.5 to 1.5 HP

Diameter of drive roller

80 / 120 mm (3.1" / 4.7")

Diameter of idler pulley, straight side

80 / 120 mm (3.1" / 4.7")

Diameter of idler pulley, angled side

70 mm (2.7")

Materials

Conveyor belt

Structured surface Flame resistant in compliance with DIN EN 20340 (optional) Other surfaces on request Belt width 90 or 40 mm (3.5" or 1.5" )

Slider bed

Polymer slide profiles

Side profile

Side guide height

120 mm (4.7" )
Other side guides on request

Downloads
BM 4430 / 4445 Belt Conveyor Merge (PDF. 277 KB) Download