Driveshaft Roller Conveyor RM 5620

The Driveshaft Roller Conveyor RM 5620 conveys unit loads on straight sections. The drive spools of the drive shaft drive the rollers frictionally so that unit loads accumulate with low accumulation pressure.

General technical data

Max. load capacity

75 kg/m

Conveyor speed

20 to 120 ft/min (0.1 to 0.6 m/s)

Incline/decline

Not suitable

Ambient temperature

+40 to +105° F (+5 to + 40° C)

Roller

Roller type

Interroll Series 1700

Roller diameter

1.9" (50 mm)

Roller material

Steel, zinc-plated

Max. number of rollers per drive

See Application Notes

Drive

Rated voltage

400 V / 50 Hz / 3 phase

Drive medium

PU round belt Ø 5 mm

Torque transmission

Round belt from shaft to roller

Side profile

150 mm (6“) Extrusion

6" (150 mm) high
65 mm above top edge of roller

80 mm (3.15“) Extrusion

Permits lateral displacement
3.15" (80 mm high)
3/16" (5 mm) below top edge of roller

Profile combinations

6" / 6" (150 mm / 150 mm) 3.15" / 6" (150 mm / 80 mm) 6" / 3.15" (80 mm / 150 mm) 3.15" / 3.15" (80 mm / 80 mm)

Downloads
Driveshaft RM5620 (PDF. 293 KB) Download